What's New in Truck Campers

Read article : What's New in Truck Campers

It’s also an economical approach, with campers starting at under $15,000 and extending upward to $40,000 or more. At the low end, you’ll find basic sleeping accommodations. Spend more and you can get many of the luxury features that would be found in a small motorhome, with good kitchens, full bathrooms, queen-size beds and entertainment centers.

The size of the camper is necessarily limited by the size of the pickup hauling it, but there are lots of options to choose from. And with new materials enabling manufacturers to reduce the weight of their campers, it’s possible to pack more amenities inside a camper without overloading the truck.

Here is a sampling of new campers offered by leading manufacturers:

Adventurer
The Adventurer 93FDS, a 2007 floor plan available in June, will add to a wide array of camper models designed to fit everything from small imports to big one-ton trucks.

The new 93FDS has a full-wall slideout that extends the dinette and refrigerator area. The dinette converts into a bed, enabling the camper to sleep four. The bathroom is given extra spaciousness with a huge skylight.

The suggested base retail price of about $24,000 includes numerous standard features, such as solar reflective windows, a Dometic two-door refrigerator-freezer, a fiberglass shower inside, an outside shower, a slide awning, an exterior yard light, and Happijac electric remote jacks to simplify loading and unloading. The holding tanks are heated and enclosed.

Adventurer campers are lighter in weight than many competitors because of their design and construction, including an aluminum frame and fully laminated walls. The Model 93FDS has a box length of 9 feet, two inches, and an estimated dry weight of 2,850 pounds.

For information, contact Adventurer Manufacturing Ltd, 33541 Maclure Road, Abbotsford, British Columbia V2S 7W1. Phone (604) 852-5731 or visit www.amlrv.com

Alpenlite
Alpenlite made its reputation in the truck camper field by pioneering aluminum frame construction and vacuum bonded walls. That emphasis on technology continues today with features such as block foam insulation, a laminated, vacuum-bonded crowned roof and a gelcoated exterior surface.

Now in its 34th year of building truck campers, Alpenlite offers eight floor plans in a range of sizes. One of its best sellers is the top-of-the-line Santa Fe 1150, which is Alpenlite’s biggest and roomiest model.

The Santa Fe 1150 includes a full queen-size bed, a center dry bath with a tub and shower seat area, Karadon solid surface countertops, and a basement storage area. The fresh water and other fluid tanks are all large-capacity, enclosed, and insulated so that the camper can be used in all seasons. Among the options is a dinette skylight with a retractable shade.

The dinette area slides out for extra room and can be converted to a bed for an additional sleeping area. The suggested retail price on the Santa Fe 1150 is $26,592. If you don’t want a slideout, you can choose the Santa Fe 1100, which offers much the same floor plan as the 1150, and also offers the option of a dinette with a fold-away table and two Flexsteel swivel chairs.

For information on Alpenlite Limited truck campers, contact Western Recreational Vehicles, P. O. Box 9547 Yakima, WA 98909. Phone (800) 777-4133 or visit www.wrv.com.

Arctic Fox
Arctic Fox truck campers, such as the new model 990 Silver Fox edition, are durable and rugged enough to endure cross-country and off-road travel because of innovations in camper engineering.

The Silver Fox edition features an aircraft-style superstructure, transverse floor, and a full-wall slide room that is 26 inches deep. The transverse floor design increases the width of the floor inside, creating a feeling of spaciousness. By using a dual rack and pinion slide mechanism and a strong aluminum superstructure, Northwood Manufacturing builds its Arctic Fox campers so that the slideout can be extended even while people are sitting in the slideout area. Heavy-duty rollers move the slideout smoothly and quietly, while five separate seals guard against water intrusion during wet weather.

With the extra depth of its slideouts, Arctic Fox is able to offer several options. For example, in the overhead bunk option, a hinged interior panel folds down from the upper wall and ceiling of the slideout and converts into an additional bunk bed over the dinette. Another option is a lounge instead of a dinette, with an optional “roll-over” lounge that converts into an extra sleeping area. All standard dinettes also convert to beds.

The bedroom suite in the Arctic Fox features a deluxe queen-size mattress with coordinated bedspread and window valence accents. A folding wall between the main cabin and sleeping area provides privacy.

Arctic Fox campers come in three interior color schemes. The interiors include solid oak hardwood features, textured wallboards on the interior walls and Ozite finished ceilings. Vinyl floor coverings are commercial grade, and there is also a carpeting option. The company offers campers in a range of floor plans, all with full-wall slideouts. The wet bath version of the Silver Fox Model 990 carries a suggested base retail price of $23,929.

For information on Arctic Fox campers, contact Northwood Manufacturing, 59948 Downs Road, La Grande, OR 97850. Phone (541) 962-6274 or visit www.northwoodmfg.com.

Bigfoot
New for 2006 from Bigfoot Industries in British Columbia is a long box version of the short box 25C9.4 camper that was introduced last year. These models are part of the Bigfoot 2500 camper series.

The model offers a spacious layout, with an aft galley with a three-burner cooktop, stainless steel double sink, 6-cubic-foot refrigerator and dinette with face-to-face seating.

All of the models in the 2500 series are constructed from two molded fiberglass shells and insulated with 1 1/2-inch high-density polystyrene block foam insulation. The fresh and wastewater holding tanks are enclosed, insulated and heated by a 30,000 BTU high-output furnace. There is an abundance of interior storage as well a large exterior basement storage compartment. The suggested base retail price is $21,870.

Bigfoot Industries, which also builds trailers and motorhomes, is in its 28th year as an RV company. For information about Bigfoot campers and to order a brochure, contact Bigfoot Industries, 4114 Crozier Road, Armstrong, British Columbia V0E lB6. Phone (250) 546-2177 or visit www.bigfootrv.com.

Citation Supreme
Built in British Columbia by General Coach, Citation Supreme truck campers are designed for all-season comfort. The company’s Polar Pak includes such standard features as high-density foam insulation, two-inch thick vacuum bonded walls with 3/4-inch thermal break, and a fully insulated basement with tanks and valves heated directly by the furnace.

New for 2006 is the Model 1050 slideout for long box trucks. The 1050 is a 100-inch wide body design that includes a queen-size bed, a bathroom with a separate sit/stand shower, and an expansive dinette area that slides out. The bedroom has more headroom than most other campers. Options include dual pane skylights with condensation control and Stormtite thermopane windows that eliminate condensation and filter out UV rays, reducing summer heat buildup.

New on the 1050 and other models is a redesigned optional bumper with three steps, making it easy to enter and exit the camper. A ladder provides access to the roof, and an optional awning over the entrance door extends eight feet. Suggested retail price on the base model 1050 is $25,380.

General Coach, which is part of Thor Industries, backs the Citation with a six-year limited structural and two-year component warranty.

For information, contact General Coach, P. O. Box 700, Oliver, British Columbia VOH 1T0. Phone (250) 498-3471 or visit www.generalcoach.bc.ca

Eagle Cap
The Eagle Cap 1050 offers a new design that includes a forward bath and a large rear kitchen/dining area, with a dinette slideout for extra room. Despite its many amenities, the 1050 has a comparatively low dry weight of 2,950 pounds.

Eagle Cap builds its campers with a welded aluminum superstructure, 100 percent vacuum laminated components and marine-grade fiberglass exterior. The materials and design keep the weight low, giving buyers flexibility in choosing a truck to carry the camper.

The manufacturer’s suggested base price on the Eagle Cap 1050 is $23,275, but popular options can push it above $30,000.

Eagle Cap is now owned by West Coast Leisure Homes, the Canadian builder of Okanagan campers. Intermountain RV, which built Eagle Cap campers, ceased operations in October of 2005, and its assets were purchased by West Coast Leisure Homes.

With new management and a staff of 42 at its plant in La Grande, Oregon, Eagle Cap has resumed production of its most popular models, with a dinette slideout available on most floor plans. Brian Tolley, Eagle Cap sales manager, said Eagle Cap is making improvements to what was already “a sound and innovative product line” by increasing the sidewall gelcoat thickness, for example, and adding other steps to add to the fit and finish quality.

For information, contact Eagle Cap Campers, 59999 Smith Loop, La Grande, OR 97850. Phone (541) 663-1607 or visit www.eaglecapcampers.com.

Host
If one truck camper slideout is good, Host Industries figured two should be even better, and so it has pioneered double slideouts, building campers that are known for their spacious interiors.
With two slideouts extended, the new Host Tahoe 10’6” has 10 feet, six inches of interior width, with the dinette area sliding out on one side and the kitchen on the other. The result is a wide, unobstructed floor area that offers room to maneuver. When one person is cooking at the stove, for example, another person can walk by easily, instead of having to squeeze by.

Host Co-owner Dave Hogue said slideouts on both sides of the camper also add to the balance of the unit. Other design measures, such as putting holding tanks forward in the unit, also enable Host to build a truck camper that handles very well on the road. Host campers are built light, using a vacuum lamination process, an aluminum frame, a fiberglass exterior and a one-piece roof of thermoplastic polyolefin (TPO)

The Tahoe has a powerful 34,000 BTU forced-air furnace and large holding tanks: 60 gallons for fresh water, 45 gallons for gray water and 35 gallons for black water.

Double slideouts are available on three of Host’s models; single slideouts are either standard or an option on all models. The Tahoe carries a suggested base retail price of $27,370 with the standard single slideout; a second slideout adds $1,400.

Host Industries was started by Hogue and Mark Storch, whose fathers created Beaver campers and motorhomes. For information about Host campers, contact Host Industries, 300 SE Scott St., Bend, OR 97702. Phone (541) 330-2328 or visit www.hostcampers.com

Lance
By adding four new floor plans for 2006, Lance gives buyers a choice of 15 models—one to fit just about any size or need. As the nation’s largest truck camper manufacturer, Lance groups its models into four product lines: Lance Lite, Lance Sports Camper, Lance and Lance Max.

The low-priced Lance Lite series has six models tailored to people’s budgets. The new Sports Camper series was developed for serious outdoor enthusiasts. The “value-added” Lance series is for RVers seeking more features and comes with increased cabover headroom, more floor space and larger tank capacities.

All Lance Max models come with full-wall slideouts, greatly increasing the interior room and adding to the overall comfort. That feeling of spaciousness is carried through in the Lance Max 981 with a huge skylight above the bed in the cabover area and another large skylight in the bathroom.

Even larger and more luxurious is the Lance Max 1191, which has the advantage of a side entry, an extra convenience for anyone who wants to tow a boat or trailer. The 1191 includes a large bathroom with separate shower, additional storage space and very large holding tanks (42 gallons fresh, 35 gray and 38 black).

New this year in all Lance and Lance Max models is a full-size mirrored wardrobe in the cabover. The wardrobe is deep enough to handle storage bins. Another new design this year is a wraparound sofa/bed in Ultra Leather. It has a removable table, and a center section that pulls out for lounging or sleeping.

Lance builds its campers with welded aluminum and bonded lamination technologies, TPO (thermoplastic polyolefin) roofs and solid high-density, rigid block foam insulation for year-round use. Suggested retail prices of Lance Max models range from $29,848 to $35,987. Other models start as low as $13,454.

For information, contact Lance Camper Manufacturing Corp., 43120 Venture Street, Lancaster, CA 93535-4510. Phone (661) 949-3322 or visit www.lancecamper.com.

Northern Lite
New for 2006 from Northern Lite is the 9’6” Queen Classic SE, which offers lots of extra features and still maintains a surprisingly low weight—2,150 pounds with standard equipment and under 2,400 pounds even with a number of options.

Northern Lite builds its campers with a process that uses two pieces of molded fiberglass and is similar to construction of a fiberglass boat. Owner Mac Donkin said the weight is kept low by the use of materials such as Nidacore flooring, which is half the weight of plywood, and Dometic acrylic thermal pane windows, which are half the weight of conventional thermal pane windows.

The 9’6”Queen Classic SE includes a face-to-face dinette, a full queen-size mattress, heated and insulated tanks, an extra-large dual battery box, stainless steel sink, and a 6.3-cubic-foot refrigerator. The model carries a suggested retail price of $24,070.

Northern Lite uses oak veneer paneling, builds drawers with Russian birch and metal guides, and never uses particle board. Careful attention to quality has earned the company a five-star rating from the RV Consumer Group for eight straight years.

For information, contact Northern Lite Manufacturing, 322 Totom Court, Kelowna, British Columbia V1X 5W6. Phone (800) 887-5342 or visit www.northern-lite.com.

Okanagan
You can warm yourself by the electric fireplace while you are watching a DVD on a flat-screen TV in the new 116ULT camper, part of the Ultimate Suite Series from Okanagan.

The 116ULT is a double-slideout model with a U-shaped dinette extending outward on one side and an entire kitchen extending outward on the other to create a roomy interior. In addition to an electric fireplace, this model also offers many other options, such as an 8- or 10-cubic-foot refrigerator in place of the standard 6-cubic-foot version, a Step-N-Stow storage bumper with a fold-down step, and a large rear awning.

The 116ULT is designed for extended camping with large heated and enclosed holding tanks, including a 63-gallon fresh water tank. Okanagan says its bathroom is the largest seen in a truck camper, with a full-height fiberglass neo-angle shower with a skylight, a large linen closet and a spacious vanity. The camper has 40 cubic feet of exterior storage to handle camping gear and other items.

Construction features include welded steel framing that is laminated into the floor and attached around the perimeter of the slideout openings for superior structural integrity. The peaked laminated roof is 3 1/2 inches thick at the center, creating a ducted roof air conditioner option. Suggested retail price of the Okanagan 116 ULT ranges from $36,000 to $42,000, depending on how it is equipped.

Okanagan campers are built by West Coast Leisure Homes, which also produces fifth wheels, travel trailers and van conversions. For information, contact West Coast Leisure Homes, 316 Dawson Avenue, Penticton, British Columbia V2A 3N6. Phone (250) 493-1535 or visit www.okanaganrv.com.

S&S
S&S has introduced a new truck camper, the Ponderosa 8.5 FBSC, billed as the only non-slideout camper with a full-booth dinette and a sliding step. The camper has a set of steps that can be hidden away under a booth seat and then pulled out to provide easy access to the queen-size bed over the cab.

S&S Owner Doug Sieler said many camper buyers are older people who find it awkward and difficult to climb into a high bed. The innovative step system solves that problem, and when not in use, the steps can be stored away to create more floor space.

The new model is a self-contained unit that is 8.5 feet long and 8 feet wide. It comes with an insulated and heated basement, a double stainless steel sink with cutting board, a three-burner range with oven, double-door refrigerator, a 20,000 BTU forced-air furnace, and a one-piece TP0 (thermoplastic polyolefin) roof. Other standard amenities include a mirrored headboard, AM/FM/CD stereo system, and a Montana gun drawer.

Another unique advantage for a camper of this size for both long and short box trucks is that it has room to add an optional Onan generator. Suggested retail price is about $18,000.

For information, contact S&S Campers, 2740 Highway 93 South, Kalispell, MT 59901. Phone (800) 735-6909 or visit www.s-scampers.com

Half-Ton Fun

Read article : Half-Ton Fun

Laredo Super Lite 289SRE" />

High fuel prices and the skyscraping cost of ³/₄– and 1-ton pickups have created a growing demand for lightweight, easier-to-tow RVs. But not everyone wants a little trailer, which has led many RV builders to focus on smaller and lightweight fifth-wheels now more than ever. And the consumer stands to benefit from that trend. However, while many half-ton towable fifth-wheels might be smaller, that doesn’t mean they aren’t spacious and filled with great features; many offer niceties such as solid-surface countertops, leveling jacks and electric awnings. And almost every brand has a fifth-wheel designed for half-ton pickups that offers a slideout to expand the living space. Some even have two or three.

Keystone’s Laredo Super Lite fifth-wheel line is a perfect example. The series tops out at 31 feet in length with a dry weight of 7,735 pounds, yet is available in two double-slide floorplans. ‘‘These fifth-wheels are extremely well-equipped, attractive, offer great value and, of course, are towable by properly equipped half-ton trucks,’’ explains Jim Mac, Keystone’s communications manager.

Having made a name for itself in the travel trailer and truck camper markets, Livin’ Lite Recreational Vehicles entered the fifth-wheel segment for the 2013 model year with the Mercury, an aluminum-and-composite fiver that will initially feature two 24-foot floorplans with dry weights of less than 4,500 pounds. ‘‘We expect the Mercury to prove to be something that changes the market a little bit in the true ultralight fifth-wheel category,’’ says Livin’ Lite President Scott Tuttle.

Mark Lucas, president of Forest River’s Shasta division, says the company’s new 100-inch wide-body Phoenix fifth-wheel in lengths of 27 to 34 feet is intended to deliver more livability in a smaller RV. ‘‘It’s more cost-effective for the consumer, easier to tow and easier to park and they give up nothing,’’ Lucas said.

More and more builders are coming to market with a half-ton towable fifth-wheel that offers many of the conveniences, features and luxuries of the larger, heavier fivers. Here’s a guide
to get you started.

Axiom 

The compact Axiom lightweight fifth-wheel built by Forks RV is aimed primarily at the Australian market, but is available through select dealers in the United States. The 7¹/₂-foot-wide mid-profile Axiom is offered in four 23- to 27-foot floorplans, each with a single sofa/dinette slideout. With a dry weight of 6,500 pounds, the aluminum-and-laminated fiberglass Axiom features an aerodynamic front cap, composite cabinets, LED lighting inside and out, thermopane windows and linoleum floors in the living area with carpeting in the upper deck — which is equipped with a queen bed. Base MSRP starts at $42,000.

Forks RV, 574-825-7467, www.forksrv.com

CrossRoads 

CrossRoads RV has added a double-slideout 30-foot lightweight fifth-wheel to its 2013 Cruiser Aire lineup. The Cruiser Aire fiver, from this subsidiary of Thor Industries, has a walk-through queen-size bedroom with a 6-foot 6-inch ceiling. Five other fifth-wheel floorplans in lengths of 25 to 30 feet will also be available. The Cruiser Aire fiberglass-and-aluminum debut floorplan, with a 7,000-pound dry weight, is equipped with electric jacks, a 15,000-Btu air conditioner, 8-cubic-foot refrigerator, maple cabinets, 54-by-27-inch shower with a glass door and a midway island kitchen with a large amount of Formica countertop space. Base MSRP: $29,995.

CrossRoads RV, 855-226-7496, www.crossroadsrv.com

Escape 5.0

Made entirely of hand-laid fiberglass in a two-piece mold, the lightweight, aerodynamic Escape 5.0 from Escape Trailer weighs approximately 2,650 pounds (dry) and offers a low center of gravity for increased road stability and a 3,500-pound-capacity independent suspension axle for reduced vibration and better handling while towing. Standards such as 15-inch tires (including the spare), LED marker lights, a 10-foot Fiesta awning and dual 5-gallon LP-gas cylinders dress up the exterior of this 19-foot 6-inch fifth-wheel. Its compact kitchen still boasts a 4.3-cubic-foot three-way Dometic refrigerator, two-burner cooktop with power range hood, optional microwave and a countertop and sink roomy enough to get the job done. The fifth-wheel has a gross vehicle weight rating (GVWR) of 4,400 pounds, making it easily towed by half-ton pickups such as a GMC Sierra or Toyota Tundra, and even by some compact pickups with appropriate trailer weight ratings and proper equipment. Base MSRP: $27,000.

Escape Trailer Industries, 855-703-1650, www.escapetrailer.com

Heartland RV

Two new rear-living-room floorplans have been added to Heartland Recreational Vehicles’ Elkridge Express fifth-wheel series for 2013. The 30-foot E27 and 31-foot E28 floorplans each have a single slideout and are among seven that the manufacturer is building for the new model year. With dry weights ranging from 7,205 to 9,250 pounds, the Elkridge Express is constructed with laminated fiberglass side walls on an aluminum frame and has an 88-degree turning angle. Features include heated storage with slam-lock doors, kingpin box covers, outside showers, Beauflor floors, solid-surface countertops, cherry cabinets with hidden hinges, 60-by-74-inch queen beds, full wardrobes, sofa air beds, porcelain toilets, dinette chairs with hidden storage and multiview TV centers. Base MSRP starts at about $24,000.

Heartland RV, 877-262-8032, www.heartlandrvs.com

Jayco

Dry weights range from 5,975 to 7,135 pounds in the Jayco Eagle HT line, with four available floorplans for 2013. Offered in 26- to 32-foot layouts, three have wardrobe slideouts to complement the living-room slide. The unusual Eagle HT 23.5RBS has a large rear bath with tub and shower to allow for more bedroom space in the upper deck. A standard Glacier Package includes an R-29 insulation value in the main floor and R-27 in the roof in addition to triple insulation in the heated-and-enclosed underbelly. Countertops are solid-
surface and cabinets have solid hardwood doors with screwed stiles. Base MSRPs begin at $30,586.

Jayco Inc., 574-825-5861, www.jayco.com 

Laredo Super Lite 289SRE" width="300" height="205" />Keystone 

With a dry weight of 7,735 pounds, the Laredo Super Lite 289SRE is equipped with a living-area slideout containing a sofa bed and booth dinette. A ‘‘Best in Class Package’’ included in all Laredo layouts includes an adjustable electric awning, LCD TV, electric rear stabilizer jacks, all-weather Glacier Package and crown molding. Standard features include a fully enclosed heated underbelly, pass-through lighted storage, residential-size cabinets, single-basin sink, two-door refrigerator, extra-wide dinette with storage below, raised-panel mortise-and-tenon cabinet doors, queen bed, wardrobe storage and entertainment center. Keystone also offers a new 31-foot 280SBH fifth-wheel floorplan with rear bunk beds for the kids in its popular Laredo Super Lite series. Base MSRPs typically equipped begin at $54,940.

Keystone RV, 866-425-4369, www.keystonerv.com

KZRV 

A tri-level rear-kitchen floorplan has been added for 2013 to the newly redesigned Durango from KZRV. The unique 37-foot double-slideout floorplan, built on a bi-level drop-frame, features a new front cap designed to allow a greater turning radius, and has a side-aisle (streetside) front bath with a porcelain toilet, large neo-angle shower and linen closet. The 331RK queen-bed floorplan — one of 12 offered in the Durango series — has a dry weight of 9,740 pounds and is equipped with 110 cubic feet of storage under the kitchen, an 8-cubic-foot refrigerator with wood insert panel, solid-surface countertops, kitchen table with four chairs, Beauflor linoleum, slam-latch baggage doors, an L-shaped sofa bed and a 32-inch LCD TV. MSRP: $49,999.

KZRV LP, 260-768-4016, www.kz-rv.com

Livin’ Lite  

Livin’ Lite Recreational Vehicles, known for its lightweight all-aluminum folding camping trailers and truck campers, has introduced the Mercury fifth-wheel. Livin’ Lite’s Mercury will have two 24-foot aluminum-and-composite floorplans, each equipped with a single slideout. Both are designed for half-ton pickups with GVWRs in the 3,500- to 4,500-pound range. One floorplan features double bunks in the upper bedroom,  while the second will be equipped with a queen bed. Both will have dry baths with LP-gas stoves, refrigerators and water heaters. The interior is available in a wood-look Azdell composite or champagne aluminum. Base MSRP: $26,000.

Livin’ Lite, 574-862-2228, www.livinlite.com

Northwood

Northwood Manufacturing has given its Fox Mountain lightweight fifth-wheel a facelift for 2013. The redesigned Fox Mountain now has tan side walls, an aerodynamic mocha front cap and a more contemporary interior with stainless-steel appliances. Built on a cambered chassis, the fiberglass-and-aluminum Fox Mountain is available in six 26- to 32-foot floorplans with up to three slideouts. With a dry weight of 7,500 pounds in the 28-foot double-slide model, a standard Four Seasons package includes heated-and-enclosed underbellies, R-7 insulation in the side walls and floor, and R-18 in the roof. Features include solid-surface countertops, Beauflor floors, centrally located control panels, exterior showers and electric awnings. A combination sofa/dinette with leatherlike fabric is optional. Base MSRPs begin at $32,500.

Northwood Manufacturing Inc., 800-766-6274, www.northwoodmfg.com

Shasta 

Forest River’s Shasta Recreation Vehicle division has introduced the mid-profile Shasta Phoenix wide-body fifth-wheel with a distinctive exterior and a kingpin that can be adjusted to accommodate 5¹/₂-foot-pickup beds. Available in eight floorplans with up to four slideouts, the Phoenix is 100 inches wide and available in eight 27- to 34-foot floorplans, all with 6 feet 4 inches of headroom in the upper deck bedroom. The gray hung fiberglass side wall on a six-side aluminum superstructure is connected to the root-beer-colored front cap. Bamboo rattan accents in the cabinets and on the slide fascia, along with Beauflor wood-plank floors, give the Phoenix a lighter interior. Dry weights begin at 7,400 pounds. Base MSRPs start at $30,000.

Shasta RV, 574-825-7178, www.shastarving.com

Starcraft RV

Starcraft RV is building its 2013 Starcraft Travel Star FW fifth-wheel series on its own StarMaxx drop-frame chassis to increase the storage capacity to 75 cubic feet. Floorplans offering two or three slideouts and dry weights from 7,415 to 7,915 pounds are available. A standard Arctic Package includes heated and enclosed underbellies with foil insulation in the roof and slideout rooms. Amenities include bourbon-glazed beechwood solid-wood raised-panel doors and drawers throughout, porcelain toilet, radius shower, oversized sinks, Formica countertops, storage drawers beneath the booth dinette and large windows over the dinette. An optional Galaxy Package includes a colored fiberglass front cap; power stabilizer jacks; remote control for patio awnings; slideout, porch and security lights; front and rear jacks; solid-surface countertops; and a 32-inch LED TV with DVD player. Base MSRP starts at $29,986.

Starcraft RV, 800-945-4787, www.starcraftcamping.com

Winnebago 

For those in the market for a midprofile fifth-wheel, Winnebago Towables has introduced the Winnebago Lite Five with four 28- to 34-foot floorplans, three of which are equipped with a single slideout and an optional wardrobe slide in the bedroom. With a cambered front cap, the fiberglass-and-aluminum Winnebago Lite Five, with dry weights from 6,907 to 8,953 pounds, can be towed by shortbed pickups. Features include high-gloss automotivelike gel coat exterior, fully enclosed-and-heated underbellies, 35,000-Btu furnace, high R-value insulation, patio awnings and stabilizer jacks. Amenities include a sectional sofa, island queen bed, a large bathroom with neo-angle shower, double-door refrigerators, a large amount of counter space and Bluetooth-enabled entertainment centers. Base MSRPs start at $28,993.

Winnebago Industries, Inc.,  574-825-5250, www.winnebagoind.com

Yellowstone

The Yellowstone division of Gulf Stream Coach has added a 29-foot rear-living room floorplan to its Canyon Trail XLT fifth-wheel series. The low-profile Canyon Trail XLT 25FLRW floorplan, with a dry weight of 7,297 pounds, has a single 38-inch-deep, 6-foot-2-inch tall slideout that contains a convertible sofa/dinette. Offering a large hallway closet with mirrored doors, the 25FLRW has a separate shower and bathroom, hardwood cabinet doors and drawers, laminated countertops with a solid-surface option and a queen bed with a flip-down fabric headboard with hidden storage. To accommodate shortbed pickups, the aluminum-framed vacuum-bonded side wall Canyon Trail XLT has an extended kingpin box. MSRP: $29,253.

Yellowstone RV, 800-811-0302, www.yellowstonervs.com 

Dream Camper Floor Plan Contest

Read article : Dream Camper Floor Plan Contest

Dream Camper Floor Plan Contest – Part 2 http://www.truckcampermagazine.com/news/dream-camper-floor-plan-contest-part-2/"> Dream Camper Floor Plan Contest – Part 2&BODY=I found this article interesting and thought of sharing it with you. Check it out: http://www.truckcampermagazine.com/news/dream-camper-floor-plan-contest-part-2/"> 12 more reader submitted dream floor plans including raw concepts, wild ideas, and subtle refinements.  And the winner of the first ever dream truck camper floor plan contest is… Just last week we visited a prominent truck camper manufacturer and the subject of our dream camper floor plan contest came up.  We talked with great excitement about the variety of ideas our readers were presenting, and encouraged them to study the plans when they debuted.  No, we didn’t give them a sneak peak.  It’s more fun to tease. None of the submitted designs, including mine, are anywhere near production ready.  That was never the intention or spirit of this contest, nor is it possible without delving into details like plumbing, electrical, and code compliance.

The true potential of this contest is to give truck camper users from around the United States, Canada, and the world the opportunity to directly inspire professional truck camper design teams.  You know, the folks responsible for the truck campers you see debut here on Truck Camper Magazine, at RV shows, and dealer lots?  This was your shot to show them your big idea, and possibly change the course of truck camper design history.

I know, crazy talk.  Then again, crazier things have happened.  I’m going to lobby the industry to take your designs and ideas seriously, as I do with our bi-annual truck camper survey coming up this fall.  Together, we will change the course of campers.

Far be it for us to determine who should win the best dream camper floor plan, except that’s exactly what we had to do.  This is, after all, a contest, and we are the big cheese, cheesette, and cheese-cat for this electron-only magazine.  After considerable review, and a tail gesture we interpreted as positive, we have a winner.

The winner of the first ever dream truck camper floor plan contest is…

Karl Pettitt, Elmhurst, Illinois – Winner

Above: Click to enlarge this floor plan and the others below to see them bigger.

Although I don’t currently own a truck camper, I would like to in the future.  I often think of what an ideal floor plan would be so this was a fun exercise.  I first did the layout in a program that was to scale.  The dimensions should be pretty accurate.

The floor length is 11-feet.  The total length is 19-feet, 9-inches.  The width is 8-feet.  It’s a single-slide, dry bath, flatbed model.

Although there are a few flatbed model campers on the market, I think there is a great deal of room for more.  Specifically, I think there is room for a larger model that takes full advantage of the ability to place the door anywhere.

To this end, I created a floor plan layout that places the door towards the front of the curb side of the camper.  This allows for greater flexibility in the placement of the bathroom, which I put across the entire rear of the camper.

The slide allows space for both a dinette and a small couch that can turn into a bed.  Placement of the kitchen towards the front, along with the heaviest components such as the fresh water tank, battery bank, and propane tanks, will help in keeping the center of gravity as close to the front as possible.

The placement of the entertainment center allows for viewing either on the main floor or the cabover.  There is overhead storage above the kitchen and couch that makes up for the lack of floor cabinets.  There is also ample windows allowing light in from either side of the camper as well as views.  I think this would make an ideal camper for a family with the potential to sleep up to six people without the use of a bunk.

#16 – David Miller, Branson, Missouri – Honorable Mention

My camper is designed with the premise that the most important things about a truck camper use are (1) the nice, soft, queen bed for sleeping, and (2) the nice bathroom for showering; not a wet bath.

The dining aspect needs less emphasis because, typically, the meals are simple and small.  In most cases, weather dependent, we eat outside at the picnic table.  Thus there is no need for a large dining table.

There is also no need to accommodate guests for sleeping.  If the grandkids are camping with us, they will sleep in a tent outside.  The concept of having the table convert to a bed is unnecessary, and a waste of space for us.

The attached drawing is for a non-slide design to fit a full-size short bed pickup.  I figure this camper will hang over the back of a 6’6” truck bed by approximately 27-inches.

Here are the wonderful features of my perfect truck camper:

It has a dry bath and shower.  This is extremely important.

The dining area has been reduced in size to only seat two adults.  The table is curved and the back of the seat cushion is curved to give the feeling and seating of a corner booth in a restaurant.  The only slight difficulty is that the person who sits down first will have to slide in and cannot get back out until the other person stands up, but, that is just like a corner booth in a restaurant and won’t be too much of a hassle.

There is a closet on both sides of the bed in addition to the foot lockers.  The television is mounted above the table, on the wall of the dry shower.

As you can see, the bed and the dry shower get the most emphasis, and the dining facilities are minimized.  It’s the perfect camper for two adults who want to shower every day after a good nights sleep.

#17 – Jake Schultz, Washington – Honorable Mention

A Folding Camper for the Ford Ranger

This camper is designed to be less than 780 pounds to work within the payload limit of a Ford Ranger.  It’s also designed to be 64-inches wide, with a maximum travel height of 82-inches.  These dimensions allow the camper to fit into a standard 84-inch garage in the folded configuration.

The camper features a full stand-up heigh interior of 76-inches, as shown.  A sun-dome could be added for an additional three-inches of interior height.

The camper has a double-pivot folding hard wall roof and sides with an open and panoramic cabin.

The camper can be used in one of four configurations:

1. Wide open with magnificent panoramic views to the aft sides and back.

2. Open to the aft sides and back, with screen netting in place.

3. Polycarbonate window panels in place (inboard of netting) for inclement weather.

4. Window panels in place and privacy curtains on the interior.

There would be comfortable seating for two at the dinette with the cushions angled slightly inward to account for the wheel well.

The camper would feature a modified full-size bed available at all times.  There would be a 24-inch cabinet for hanging clothes under the foot of the bed.

To save weight, the roof would be built for structure and snow loads only, not to stand on. The floor would be to stand on only if the camper is on the ground or in the bed of the truck, again to save weight.

There would be no jack stands.  The camper is suspended from the owner’s home garage root trusses to remove and store.

There would be an ice chest under one seat and Porta-Potti under the other.  There would be no refrigeration systems or black water tank.

All systems are in one four-foot module along the right side for minimum weight and system run lengths.  The module contains the propane tank, propane heater, two-burner stove, sink, fresh water tank, grey water tank, battery, converter, inverter, and small item storage.

#18 – Mark Larson, Phoenix, Arizona – Honorable Mention

This is my drawing for one of my dream campers.  Please excuse the poor scale on the toilet, lavatory, and kitchen sink.

I know this would be better as a flatbed model because of the side aisle going to the cabover and the location of the shower.  It could also be an above the bed rail model.  I’m with you wanting a camper with no slide outs.  You had a great design of your own.

#19 – Kari Miller, Branson, Missouri – Honorable Mention

My truck camper is the best design ever.  Here are the great features:

1. There is actually a solid wall between the over cab bedroom and the rest of the camper.  This creates total privacy, similar to a fifth wheel with an isolated separate bedroom.

2. The step to the bedroom is offset so there is not direct line of sight into the private bedroom.

3. There is room at the foot of the queen-size bed to access the closet and a real two-drawer dresser, which is what is needed for storing clothes in a camper.

4. A narrow, but deep and tall closet is behind the refrigerator is accessed from the step.

5. Instead of wasting room on a full table top and a table that converts to an unnecessary bed, this camper has a bar top for dining.  The seating consists of two bar stools which can be clamped down for traveling.  People spend many hours sitting on a bar stool so, obviously, these would be comfortable.  Plus, for most eating situations, people will either sit outside at the picnic table, or go out to eat at a restaurant.  There is a big window over the bar top so it would be pleasant sitting.

6. There is a slide-out pantry between the bar top and the range

7. The bathroom has a dry shower, which is important.

8. This camper should fit in a full-size short-bed pickup.  There are no slides, and it is
hard-sided.

#20 – Mike Cianci, Loveland, Colorado

Here’s my plan.  It’s fairly basic.  I chose a wet bath because it’s easier to clean.  Put it in the forward section near the wardrobe with a privacy curtain so nobody has to see your business.  And it’s easier to keep the bed/bath/dressing area cleaner.

I chose wardrobes with shelves or drawers which is more practical than hanging closets.  Who is bringing their tux and ball gown while truck camping?  There are overhead bins throughout where practical.

There would be LED lights, two batteries on a movable tray, and a small solar setup.  Only simple shades are necessary; no cornice, or valance boxes around the windows.

There would be 12-volt and 110 AC throughout, two Fantastic fans – one in the bedroom and kitchen – and an air conditioner   There would be a full-size skylight/dome in the bath with a side wall exhaust vent.

The sofa could be a jack knife-style, or have storage underneath.  And it would have two pull-out tray tables mounted in or adjacent to the armrest.  Plus it would pivot for easy egress from the sofa while eating or using computer, similar to tray tables on airliners in first class.

The television would be on standard pivot for bedroom and living room viewing, and would recess in a cabinet above the slide out pantry.  The rear exit door would have a platform deck for easy entry/egress.

#21 – Kevin Pinassi, New York, New York

#22 – John Wells, Hollidaysburg, Pennsylvania

My design is a modification of the Chalet Ascent S100F, a limited production model (six total!) that Chalet discontinued to pursue production of their more profitable double and triple-slide models.  We love ours because it is completely usable with the slide in or out.

It has huge floorspace when the slide is out for entertaining friends and for ladies to dress in Civil War hoops (don’t ask).  The front bath allows a full height pleated curtain immediately behind the dinette to be drawn across to create a dressing room with access to bath, bed, and wardrobe.

There are no appliances in the slide, minimizing slide-out weight, and wear and tear on electrical and gas connections while maximizing efficiency of the refrigerator.  While we love our camper, please allow me to debut … drum roll… The Wellspring S110F.

My modifications to Chalet’s original design are as follows:

There would be 10-inches of increased length in the main cabin.  On the slide-out side, this extra wall space at the junction of the overcab and cabin strengthens the exterior at the crucial front corner tie-down.  We have already noticed flexing at this point and have taken steps to greatly reinforce this important structural location.  On the kitchen side, this extra 10-inches allows an increase in much-needed counter space, as well as under and over cabinetry.

I would also add about four to five inches to the side-to-side width of the wet bath.  The wardrobe doors and bathroom door would still function even with the slide in.

Additionally, I’d add half-penguin cabinets to the night stands at either side of the bed in the nose of the overcab.  These units would be open-shelved on the sides, half-depth and about 3/4 height, with a small rail or lip on the shelves and top edge to keep books, phones, clock, etc from falling out during travel.

I’d also add a three drawer cabinet with open top shelf and top rail at the foot of the bed on the bathroom side.  I’ve avoided the side hampers as I feel they add significantly to the difficulty of changing the bedclothes, though they could be added quite easily as an option.

#23 – Bob Dold, Monson, Massachusetts

Attached is my submission for the dream floor plan contest.  It is based off an EarthRoamer layout modified with a fore/aft dinette and an undercover slide-out compressor refrigerator chest.  I chose the slide-out compressor fridge since they are more efficient than a three-way refrigerator, and it allows for additional counter space.

One of my favorite features of the EarthRoamer plan is how the closet and bathroom doors can be opened and secured to provide a changing area outside the wet bath with access to the closet.  The wet bath has a wooded floor grate to provide a cleaner surface for the bath when the shower isn’t being used.

Access to the toilet cassette is through the rear storage door which drops down and can be used as a counter when cooking outside.  Another door above the horizontal door to the left of the spare tire can be used to store chairs and other lighter items out of the weather.

I prefer the side entry design as it allows the entire back wall to be used for storage and it allows access to the camper from the curbside when parked without having to remove bikes/trailers from the back of the camper.

The pantry to the left of the closet would be a bank of drawers with a window air conditioner unit above to provide for cool air without the expense and height of a roof mounted unit.  The dinette would be a little under three feet wide and can convert to a single bed if needed.

Large awning windows on either side provide lots of light and views with storage cabinets above them (not shown).  The overcab queen bed runs north/south to allow for getting out of bed without having to climb over your significant other, and has windows on both sides along with a skylight/Fantastic fan for good ventilation while sleeping.

Another feature I don’t see included on many campers any more is a pass through.  I would like the ability to stealth camp and having the pass through allows one to enter and exit the camper without having to go outside.

#24 – Floyd Schotel, Williams Lake, British Columbia

I’ve been dreaming up my ideal truck camper for a little while now, so you’re design contest is a great opportunity to share my napkin sketches!

For fuel efficiency, handling, and stealthiness, my ideal truck camper would be a low profile pop-up design to fit a 6.5-foot bed, full-size pickup.

The camper body extends past the bumper, dropping down for a low step-in side door.  Inside steps lead to the floor height.  This way the back of the camper is open to mount bikes, fuel, spares etc.  Also, the side door is a natural access to the curb or side picnic area.

Most of the windows are in the soft sides of the pop-up.  That way the camper will be more secure when in the locked down position.  In fact, the camper may look more like a service truck than a camper when in travel mode.

I’d keep the camper as small and tight to the truck as possible.  To keep things simple, I can do without a toilet/black tank, but a collapsable shower would be nice.

This camper is designed for boondocking and overland excursions as well as urban stealth camping.  I love the idea of taking my bed and a hot shower with me in a compact camper for a road trip.  No need to stress about finding a hotel, and a meal can be fixed anywhere, pronto!

#25 – Glenn Yauney, Milwaukie, Oregon

Here is an idea of a dream truck camper floor plan.   We started with the floor plan of a 1140 Arctic Fox.   We added a rear slide-out and side entry.

We would prefer a camper with both a rear and a side slide-out.  When towing a trailer, a rear door entry is awkward, thus we prefer a side entry into the camper rather than a rear entry design.   We added a large closet in the rear slide-out opposite the entry door for boots, outdoor clothes, etc.

Storage space is also at a premium, so I propose one that has both ample wardrobe closets and storage space equipped with larger drawers.  You can’t have too much storage space.

Exterior storage isn’t shown, but basement and exterior storage are also a must.

#26 – TJ and Kelly Kretschmar, Kansas City, Kansas

I am a mechanical engineer and have the ability to convert .pdf’s to CAD.  The Unimog part of the drawing can be found in the technical manual from Mercedes Benz website.  I printed the drawing to .pdf, then converted it to CAD.  I then printed the drawing for the Pangea concept and converted the drawing to CAD.

The reason I choose to draw this concept in CAD was to see if it was physically possible to put a garage bay in an expedition vehicle, and to incorporate my own ideas into the same space that would fit on a Unimog chassis with a single rear axle.

I deleted the interior of the lower living area so I could insert my own concept.  The items that I used from the original GXV drawing are the exterior walls, entry door, cassette toilet, and spare tires.  The loft area and access stairway is also GXV’s design, only with one bed instead of the two indicated in their drawing.

I used the Unimog drawing to make sure the entry door, center of gravity, and departure angle were going to work with the design.

We like the Pangea Lifting roof on a Unimog concept, but wanted it to double as a toy hauler.  We put one bed in the loft area to give the dinette area a sense of a vaulted ceiling.  The unit can be used in the down position for extreme cold weather.  The garage door folds down allowing access to spare tires.  The ATV slide out is similar to a Tommy Lift gate.

The camper would be able to detach with its own hydraulic jacks and allow for the installation of a dump bed.

This, of course, is just a dream.  For now our 1994 Hallmark Ute and 2006 Nissan Titan will have to suffice.

Related Items: