Part 5: Making room for our home’s hiding places

Read article : Part 5: Making room for our home’s hiding places

As we put the finishing touches on the plans for our home, our dreams of dinner parties in the finished open kitchen, of repurposed original sconces and refurbished original details, gave way to a less sexy obsession. The mop, the vacuum, our winter coats, the laundry. Specifically: Where would they all go and how could we banish them from sight?

In the New York prewar apartments we’d lived in for years, closets were strictly optional and washer-dryers were nonexistent. What made glossy interior photos appealing, I came to realize, was what you didn’t see, because it was tucked into a hidden closet or built-in cabinet. Renovating our house gave us a shot at discreet convenience.

Entering the first-floor apartment, pre-renovation, meant coming face-to-face with a faux-wood-grained cabinet door—in actuality, a false front. It was an arguably clever way to bump out the bathroom on the other side to make room for a turquoise jacuzzi-shaped tub. Otto’s initial plan for the enlarged bathroom included a non-aqua, 6-foot tub. But what we really wanted was an entryway closet. With a standard 5-foot tub, we gained a proper foyer and a narrow coat closet on the other side of the wall.

First-floor square footage was valuable, but we admitted to ourselves we would be much likelier to stay on top of the wash if it were integrated into kitchen chores and didn’t involve trekking up and down stairs. So Otto designed a new pantry/washer-dryer closet in the kitchen with an automatic light and stacking electric Miele washer-dryer. The same closet, which my partner later fitted with an Ikea Norberg table and some Elfa wire shelves, would also hold cleaning supplies and dog food.

The closets pre-renovation.

The laundry pantry in progress.

One of our favorite ideas from Otto: Since our ceilings are 10 feet high, he suggested additional closet doors above both the entryway closet and pantry. The mini-closet above the pantry alone would provide an additional 15 square feet of storage. Our contractor, CNS, priced out the additional closet framing and custom doors at a very reasonable $600.

We could have added traditional closets to the bedroom. But we wanted to keep the non-utility rooms flexible, in case we add to our family or otherwise change how we used the house. The windowless room between the living room and bedroom would make a perfect walk-through closet.

Using left-behind plastic garment racks upstairs convinced me that I did not want open storage. Open storage is for the preternaturally tidy, which I am not, and I wanted seamlessness and harmony. Generally, getting to “seamless” means custom cabinetry. Otto estimated a wall of built-in clothes closets with nice doors could run around $6,000. Or we could hack some Ikea for less than a third of that.

The Ikea PAX wardrobe boxes in the closet area.Devon Banks

We thought we’d left Ikea behind with our futon days. But that was before we had a designer who knew how to use its modular components precisely, or how to hack cabinet frames with custom doors. For the storage that was really going to put in the work, the old blue-and-yellow big box was it. With Otto’s help, we were soon on a first-name basis with the Ikea catalog.

Naturally, there are no short trips to Ikea. Not with the cavernous dimensions, the waits for returns, and the inescapable, interminable “full-service” pickup. It frayed domestic relations. “I feel so basic getting into a fight on the Ikea line,” said my partner, as we traded apologies on what felt like our 50th visit. By then, paying the impressively responsive Perfect Assembly $50 to $149 to shop and deliver from a New Jersey Ikea seemed worth every penny. (They also will put it together for you for a reasonable fee.)

We got lucky with Ikea’s ubiquitous PAX wardrobe boxes: three PAX frames in a row (small, medium, and large widths) just fit the walk-through closet space when bolted to the wall—no fill-in molding required. But my partner disdained the PAX doors: They were cheap-looking without even being that cheap.

Enter Semihandmade,* which makes a variety of doors for PAX frames that start at just $40 more a door than Ikea’s Hemnes doors, though you have to factor in production times and shipping from California.

We were trying to be disciplined about the finishes, sticking to neutrals knowing that color variation would come later with removable items like rugs and art. We sought to limit the number of wood tones we chose, settling on matte white oak (the same wood as the original staircase and the one we chose for the floors) and a darker walnut and mahogany. We promptly fell in love with Semihandmade’s flat-sawn walnut doors, which fit the moodier, cocoon-like feel we were going for in the bedroom suite.

The completed and stocked laundry pantry in the kitchen. Devon Banks

We wanted a similar aesthetic consistency on all the house’s hardware: Almost everything new would be either antique brass to match the house’s original hardware, including the snakelike exterior door handle, or a more transitional matte black. (For the uninitiated, “transitional” is what bath and hardware manufacturers came up with to describe fittings that aren’t sleekly modern or fussily traditional, but streamlined enough to fit in with either decor.) For the closet doors, we picked inexpensive brass tab pulls whose clean lines didn’t compete with the beautiful walnut grain.

For the walls, we tried to be strict about sticking to white and three shades of gray, one of which, the blue-green-gray Night Train, we used in a glossier exterior finish (called Grand Entrance) that would only be found in the outer vestibule and door. We went with Benjamin Moore—already Otto’s go-to paint brand—who generously provided product.** After at least a dozen sample pots, we settled on Brushed Aluminum, the ideal ambiguous, warmer sage gray for key moldings and our foyer.

Benjamin Moore Century paint colors.Devon Banks

To hide television cords, we went back to Semihandmade for a $20 wall-mounted Besta frame topped with a DIY slab door ($44). Late one night when the contractors were gone, we painted the Besta door the same white we’d chosen for the living room and dining room, Benjamin Moore’s Snowfall White, in the hope it would simply recede into the wall. We added a matte-black handle from Atlas Homewares I’d ordered on Amazon as a sample for the kitchen.

New to Benjamin Moore is the velvety Century line. Unlike the bajillion colors available in Moore’s other paint lines, Century is a much smaller selection of highly saturated colors—intriguing but intimidating—that have to be seen in person to be understood. My partner was averse to truly dark colors, so my love for dark teal would be limited to the office. After spending time with all the emerald tones, I picked Light Beryl.

For the bedroom area—both walk-through closet and bedroom—we chose Marcasite, which would also visually separate it from the sunny white of the more public rooms of the house.

Another cheap trick to attain the visual smoothness of built-ins: Painting Ikea Tarva furniture, made of unfinished pine, with the same Marcasite paint and then upgrading the hardware. It took all freaking night, what with two disassembled dressers and two nightstands, but in the end, we would have our “built-in” furniture at a fraction of the price.

*Semihandmade partnered with the homeowners on this project; they received a 50 percent discount on cabinet fronts.

**This project is sponsored in part by Benjamin Moore, who provided the Century paint.

Next week, onRenovation Diary:

Our intrepid homeowner finds out what happens when you try to carry slabs of marble on your own—and a peek at the finished bathroom.

Moms Share Pics Of The Worst Places They Had To Pump

Read article : Moms Share Pics Of The Worst Places They Had To Pump

177Shares

Breastfeeding is touted as one of the best and healthiest things for new babies, so why is it so stinking hard for working moms to find a place to express breast milk? It’s no surprise to many nursing (or pumping-only) moms to find out that mothers everywhere are pumping in weird, uncomfortable, and sometimes downright gross situations.

In fact, there’s even an organization that started in retaliation to milky moms’ fight for clean and appropriate pumping spaces at work. Among other issues, MomsRising advocates for nursing moms to highlight their experiences and demand change.Which is fantastic, because moms who are making milk for their babies shouldn’t be resigned to pumping in their cars or hiding in closets hoping no one walks in.

Here are the fifteen worst places moms have had to pump, and this is just the beginning of awful pumping locations moms have dealt with while nursing.

15Do It Standing

Mom Audrey shared this snap via Twitter, in which she’s standing in her company’s bathroom while pumping. We applaud this mom’s courage in pumping in the wide-open, since a lot of moms are shy about pumping and would prefer to huddle in a corner. We’d hazard a guess that she could be walked in on any time, since this looks like a bathroom with multiple stalls.

Obviously the outlet location isn’t ideal, since she’s forced to stand to pump, and there’s no way she can hide if someone walks in. Plus, when women are washing their hands at the sink, she could get spritzed with water. Luckily, Audrey says this was at her last job, so we hope she’s moved on to a better workplace with a dedicated lactation room!

14McDonald’s Slammed For Bathroom Pumping

Huffington Post reported on a fast-food worker who returned to her job after having a baby. After breast feeding for the three months she was home with her new baby, the mom wanted to continue making milk by pumping on her breaks. Even though her manager required a doctor’s note, which the mom provided, her supervisors refused to give the mom a private area to pump that met the legal requirements for nursing moms on the job.

This determined mama resorted to pumping in the (public) bathroom at the McDonald’s location, which is bad enough, but then her manager forbid her the use of even a dirty public restroom to express milk for her baby. The employee had to clock out, travel to a nearby library, and use their bathroom to pump in. Ultimately legal action earned better conditions for lactating mamas at this particular store.

13While Moving At Top Speeds

Mom Jen shares on Twitter that while on an Amtrak train, she had to pump in a cramped and dirty bathroom. There also wasn’t a lactation room at the Chicago Union Station, which she stopped at during her travels. Being on a train has to be one of the worst places to pump just because it’s moving so fast, and we hope Jen keeps a good hold on the milk so she doesn’t end up sloshing it all over the place.

Being in close quarters with a bunch of other people isn’t fun anyway, but being stuck on a train and needing to pump, only to find out that you have to use the bathroom truly sucks. Maybe this tweet will spur change with Amtrak, and they’ll at least add some lactation rooms to their station facilities.

12Stains Of Past Pumpers

Mom’s serving up milk for her baby, so the name might be appropriate, but the location is lacking in a few basic pumping amenities. Apart from an outlet, nursing moms need a (somewhat clean) surface to set their pump and the resulting milk on. As KUOW employee Isolde Raftery wrote after her return to work following maternity leave, lactating moms plug their pumps in to an extension cord that hangs from the ceiling.

The dated office chair is stained with old milk spills, and there doesn’t appear to be a sink or other counter space. Any mom who’s done the pumping and pouring routine knows that there’s a high chance of spilling milk if you’re trying to hold one bottle between your knees while pouring the other one into it. But hey, at least this location has a door that locks.

11The Irony Of Dairy Storage

KUOW shared this image of mom Stephanie Parker’s pumping space, which happens to be a storage room at the dairy export company she works for. This pumping mom says the irony of pumping in the dairy supply room isn’t lost on her, and the room does have one thing going for it- it’s not in a bathroom.

By the looks of it, there might even be a fridge in the back corner, although that office chair doesn’t look very comfortable for pumping moms. Plus, is there a sink in this room? We doubt it. So mom probably has to wash her pump parts and store the milk in the bathroom, or risk embarrassment or judgment from coworkers if she uses the employee break room. Then again, since it’s a dairy facility, maybe they won’t mind.

10Soggy In More Ways Than One

Every nursing or pumping mom is used to getting a little soggy from time to time from spills, but it looks like this pumping scenario has the potential to turn into a full-body drenching. We suppose that a shower is a step up from a toilet area as far as bathrooms go, but a shower with an uncomfortable chair isn’t our idea of the best milk-producing ambiance.

The worst thing about this pumping setup, a group of moms told KUOW, is that this medical center actually has lactation rooms. A group of moms (eight of them for this one shower stall) can’t make it to the lactation room in the time they have to pump. It’s either don’t pump at all, or pump in the shower room, and for these nursing moms, it’s clear that making milk is a priority.

9This Mom Almost Broke The Internet

Mom and social worker Mazzalai Nguyen became internet famous when she shared a pic of herself pumping in a hotel lobby. She told US Magazine that she was fed up with the staff at the hotel she was attending a seminar at, since they shut down every reasonable request she made for a space to pump.

Their excuses ranged from they didn’t have any clean rooms to put her in (Nguyen says she found vacant rooms on Expedia), to the hotel’s conference room doors didn’t lock (Nguyen said she didn’t care), to only the General Manager had a private office and it had glass windows (Nguyen also didn’t mind this option). In the end, Nguyen sat down on what we hope was a comfy chair in the hotel’s lobby, set up her pump, and got to work making her baby’s milk. We hope she gave the staff what-for too.

8Milk Making On The Fly – Literally

It’s hard to pump when traveling- even if you’re only driving 20 minutes from home. Packing supplies, tubing, the pump, extra bottles, and a cooler with ice is just the beginning. Add luggage and layovers to that mess, and you’ve got a pumping mom who learns to dread traveling. Plus, TSA requirements state moms can take pumped milk on the plane, but we’ve seen one too many social media posts about agents who unceremoniously dump out moms’ milk anyway.

At least this mom found an outlet and was daring enough to pump in a public spot! For moms who travel a lot for their jobs, their first priority is often to find a pumping-friendly location. Even if the bathroom was her first choice for some semblance of privacy (without considering the ick factor), outlets aren’t always conveniently located.

7Flooring It For Baby

This mom will do anything to get her baby fed, including sitting on a germ-infested bathroom floor to pump milk. It’s infuriating to see moms pumping in bathrooms in the first place, but this mom’s employer didn’t even provide a chair. Luckily her pump is a portable, battery-powered one, so she’s not tied to an outlet to get the milk out.

We suppose sitting on the floor is a better alternative than sitting on the open toilet, since it doesn’t seem to have a lid, plus we imagine there are germs on every surface in there. It almost makes me grateful for the times I had to pump in a bathroom, because at least I was responsible for cleaning it, so I knew it would be somewhat sanitary. That, and I had a spot to sit that wasn’t an open toilet.

6Multitasking Like Only A Mother Could

With MomsRising’s hashtag, #ipumpedhere, this mom shares her less-than-ideal pumping situation. We imagine she’s parked for this pumping selfie, but at least she’s handsfree, so she probably pumps on the road too. Of course, many moms do, especially those with a long commute or lack of pumping location if they travel during the workday.

What sucks about this pumping location is she has to either run her AC or heat, depending on the weather, and people walking by can just look in while she’s parked. Definitely not the privacy of those cushy pumping rooms that we’ve seen elsewhere. Plus, she then has to transport the milk, and what happens if she spills some in her car? Rancid mama milk smells just as good as any other spoiled milk, but now it’ll be all over the car.

5School’s In (Pumping) Session

This pic bugs us for so many reasons, but we’ll start with the fact that there’s an extension cord running under the door for mama’s pump. As if lugging a pump and supplies and bottles around isn’t enough, this mom also has to find and plug in an extension cord, drag a couple chairs into the bathroom, then get started pumping. We sincerely hope she has enough time in her schedule to fit in the actual milk making, because this setup would have us dreading each pumping session.

Whether she’s a teacher or school staff, there’s no excuse for this mama not having a more sanitary and convenient place to pump, considering that many teachers have offices, plus there has to be a nurse’s room or something, right? Wouldn’t a first aid setup room make more sense than an unhygienic bathroom that doesn’t even have counter space or an outlet?

4Unwelcome Visitors

Another contribution to MomsRising campaign, this cluttered photo shows a variety of supplies in a storage room with very little space for mom and her set of milk makers. Is that chair with the box on it where she’s supposed to sit? And are those cords plugged in somewhere, or is there an outlet buried behind the stacks of junk that are piled up?

We’re a little nervous for this mom’s safety, but at least the space has a door that closes and hopefully locks. Still, with the range of supplies that are in here- projector, coffee pots, electrical components- odds are, someone’s going to come looking for an item while this mom is pumping. Every pumping mom dreads hearing someone try the door while they’re pumping, and this is the worst since she’s in storage central for the entire office.

3The Copy Room Cliche

This awkward setup has us shaking our heads for a few reasons. First, there’s clearly a copy machine right inside the door, likely the primary use of this room. We can imagine a queue lined up to make copies as this mom exits with her pump and freshly made milk. Then there’s the fact that this is some kind of control room- is that a wireless router we spy on the wall?

We hope that tech support or computer engineers don’t need to get in here for any reason, especially when this mom is pumping, because interruptions while you’re trying to make milk are obnoxious and uncomfortable. However, this mom told KUOW that her agency was planning a location move, and that the new space would have a dedicated lactation room. Hang in there, mama!

2Taking Care Of Business Times Two

Mom Lee Ann Yonker shared on Twitter that she was going to Vegas for business, and that her little girl was back at home. We’re sorta jealous of this mom because she wrote that she has Freemie Cups, which every nursing and exclusively pumping mom lusts after! Freemies are a hands-free pump that includes cups that fit into your bra. So it’s not that shocking that this mom was pumping in the airport and inside a casino, because her pump is fairly discreet.

Other than the odd tubes coming from her chest, this mom’s pumping situation isn’t that noticeable. However, pumping in a smoky casino isn’t our idea of enjoyable milk making, especially knowing that we’ll probably have to visit a bathroom after to pour the milk into bottles and store it. Then again, maybe this mom has a hotel room and a fridge, in which case this might not be the worst pumping scenario we’ve seen.

1Uncomfortable In Every Way

This mom told KUOW that her office is too small for her to pump in, and her company doesn’t offer a lactation room for milky mamas. At least she has a portable pump, so she’s not tied to an outlet for power, but it can’t be comfortable pumping in her car. Trust me, I’ve been there, in 80 degree temps with the windows up and trying to hide from coworkers as they walked past my car.

We also wonder though if this mom shares an office with coworkers, and maybe that’s why she pumps in her car rather than negotiate better pumping conditions. At least this way, her entire office doesn’t know that she’s taking a pumping break, because we know some uneducated types feel squeamish when we talk about making milk for our babies.

Sources: MomsRising.com, KUOW.org, HuffingtonPost.com, USMagazine.com, Twitter

177Shares

Delta Shower Doors - Design Your Own Shower Doors In Three Easy Steps!

Read article : Delta Shower Doors - Design Your Own Shower Doors In Three Easy Steps!

The last time we remodeled our master bathroom, Ronald Reagan was president, a first-class stamp was 24¢, and the Dow Jones Industrial Average was around 1,900. At the time, we tiled the walls and floor, put in a stock vanity and toilet, and installed a 4’ one-piece shower with sliding glass doors. A few years ago, we replaced the vanity, and the room still looks pretty good overall. Taking a closer look, though, the faucets are getting tarnished, and the glass doors are looking pretty dated and beat. Recently, the folks at Delta offered us an opportunity to try out a new service they are offering in conjunction with the Home Depot. Put down your copy of 1984, and take a look. We’ll show you how easy it is to customize and order your own Delta Shower Doors!

delta shower doors" width="460" height="375" class="size-large wp-image-25841" />The old 1980’s doors look ok from a distance…delta shower doors" width="460" height="311" class="size-large wp-image-25889" />But a closer look shows it’s time to update.

The process is fast, easy, and almost fun—not an adjective you normally associate with buying a shower door. To begin, you first select what type of Delta Shower Doors you need—sliding tub, sliding shower, or pivoting shower. If it’s a shower door, you’ll need to know the measurement for the width; there’s a link on the first page that shows you where to measure.

delta shower doors" width="460" height="311" class="size-large wp-image-25885" />The Delta Shower Doors website shows what measurements you need.

At this point, you have two choices: choice one is to choose your door type and finish the design process online, which is simple and takes just a few minutes. Choice two is for those who hate doing anything online, or who just want to get out of the house, and perhaps go somewhere that has people strolling about in orange aprons, eager to help you get through the design process. It turns out Home Depot is the only place to go since Delta Shower Doors are available in-store exclusively there. Here’s a quick overview of the process from Delta:

[embedded content]

Assuming you want to do it online, after choosing your door type, just click on the red banner that says “Step 1: Choose Your Glass.” Crazy as it sounds, this is where you’ll choose your glass. There are eight styles to choose from, including various patterns and textured glass. If you like to keep an eye on things while you’re showering, you can even select clear glass.

In the next step, you’ll choose the track for your Delta Shower Doors. You can select chrome, nickel, bronze, or polished brass. In each step of the process, prices are clearly shown for each option, and a little monitor on the upper right shows your selections so far, along with a running total cost. There is also a picture on each page, and whenever you make a selection, the picture is updated automatically to show what your door will look like.

delta shower doors" width="460" height="341" class="size-large wp-image-25824" />Designing your doors online is fast and easy…

The final step is to select your hardware. There are four styles of towel bars to choose from, depending on your tastes. If keeping it simple is your style, take a look at “Simplicity.” Looking for something with a bit more panache? “Panache” might be just the thing. The other two offerings don’t lend themselves to cheesy references; you’ll just have to look for yourself.

And that’s it, you just designed your own Delta Shower Doors! Just click on “See Your Design” to—you guessed it—see your design. At this point, you’ll also be able to look through several accessories that coordinate with your design, including faucet sets, towel bars, toilet paper holders, drawer knobs and even flush levers for your toilet! Click on “Add To Cart,” and you’ll be taken to the Home Depot web site. First, select your delivery method; you can choose to have it shipped to the nearest Home Depot for free, or to your home for a fee. Proceed to the checkout, pay, and sit back and dream how splendid your baño will look when your designer door arrives!

delta shower doors" width="460" height="689" class="size-large wp-image-25825" />Eight days after ordering, the Delta Shower Doors arrived

The order for my custom doors was placed on October 7th. On October 15th, a big ol’ truck rolled up, and a box of Delta Shower Doors landed on our side porch. Not bad, I’ve had stock special orders take longer than that to arrive. The doors are shipped by ground freight; when they get to your area, the trucking company will contact you to set up a delivery date. If you’re hiring someone to do the installation, tell them when to show up, and your mission is complete. On the other hand, if you have average DIY skills, and some basic tools, you can do your own installation. This will save you some money, and earn you the awe and respect of everyone you meet.

The HomeFixated Guide To Installing Your Delta Shower Doors

If your tub or shower is new, and you don’t have to remove an old set of doors, you have permission to scroll down to “Delta Shower Doors – By The Book.” Otherwise, the first step in the installation process is to make the old stuff go away. If your old doors are still in good shape, your local Habitat for Humanity or other salvaged-goods store may accept it for resale. This accomplishes several things: it eliminates your disposal problem (some trash haulers may not take large items), it keeps usable stuff out of the landfill, and you might even get a tax write-off!

Most shower doors are installed the same way: upright brackets go at either end of the shower, and are screwed into the edges of the tub or wall. A track fits in between them, and sits on the edge of the tub or shower. Finally, the top rail is attached to the top of the edge brackets. After all that is in place, you tip the doors into place, where little wheels glide along an overhead track. Usually there is a center bracket in the bottom track to separate the doors, and hold them into the track. To take it apart, we’ll simply reverse the process. And now for the first HomeFixated tip of the day: spreading a towel on the shower floor will help protect it, and will also keep screws and debris out of the drain.

First, pop out the old doors. Usually you can do this just by unscrewing the dividing bracket, lifting up on the doors, and tilting them into the shower. Once the doors are off, unscrew the side brackets and tip them in toward the center. There will probably be caulk wanting to hold them in place; use a painter’s multitool or a flat-bladed razor scraper to convince them to give it up; just be careful not to scratch your walls or chip your surround.

delta shower doors" width="460" height="345" class="size-large wp-image-25827" />First, remove the divider from the bottom track…delta shower doors" width="460" height="345" class="size-large wp-image-25830" />Tip the doors in, and pop them out of the top trackdelta shower doors" width="460" height="306" class="size-large wp-image-25833" />Carefully break the caulk bond…delta shower doors" width="460" height="306" class="size-large wp-image-25832" />Unscrew the wall jambs…

At this point, you should be able to tip the sides and top outward. The bottom rail is usually just held in place by caulk; scrape it off, and the rail should pop right out. Use your flat-bladed razor scraper, and a sponge with some cleaner that’s safe for your shower’s surface, to get the rest of the caulk and years of accumulated nastiness off the entire opening area.

delta shower doors" width="460" height="306" class="size-large wp-image-25838" />Tip the header and wall jambs out…delta shower doors" width="460" height="351" class="size-large wp-image-25837" />Break the caulk bond, and pry up the bottom track…delta shower doors" width="460" height="391" class="size-large wp-image-25836" />Scrape up any remaining caulkdelta shower doors" width="460" height="689" class="size-large wp-image-25839" />Give it a good cleaning, and you’re ready for your new doors!

And that’s it, you’re ready to install your sporty new Delta Shower Doors! If you want to see how the pros do it, Delta has a series of helpful installation videos. The following is their sliding shower door installation video:

[embedded content]

Delta Shower Doors – By The Book

Even if you’ve done a shower door installation before, it’s a good idea to read the instructions. The instruction manual that comes with your Delta Shower Doors is excellent, very clear and thorough. The first page gives a list of all the tools and supplies you’ll need to install your doors, so a good first step is to round everything up. Unpack the doors and rails, and make sure all the parts are there. Some of the parts are stuck in the packing foam, so don’t pitch anything until your installation is finished. I’ll give an overview here, but the manual has much more detail, and is, as they say, profusely illustrated.

The wall jambs go in first. The jambs must sit flat against the shower wall and the threshold; if you have a tile wall, or a tub or shower with a perfect 90° angle where the wall meets the threshold, you’re set. If you have a tub or shower where there’s a curve there, you’ll need to round off the bottom of the side rails to conform to the curve. This is no big deal; the instructions tell you to use a coin to mark the contour onto the jamb. What they don’t tell you is that you probably won’t be able to SEE that mark!

delta shower doors" width="460" height="376" class="size-large wp-image-25845" />You can use a coin to mark the radius.

A little HF tip: put a piece of masking tape on the jamb, and make your mark on it. Use a pair of tin snips or a hacksaw, and cut to that approximate shape. Finish smoothing it to the right shape with a file or angle grinder. You can also use an angle grinder to do the whole process; that’s what I did, just be careful not to get carried away with it.

delta shower doors" width="460" height="345" class="size-large wp-image-25846" />Use snips, a file, or a grinder to shape the jambs.delta shower doors" width="460" height="377" class="size-large wp-image-25847" />A good, tight fit in the corner.

Place the wall jambs against the wall, centered on the bottom ledge. Use your level to plumb them, then temporarily tape them in place. Next, you’ll drill a 1/8” pilot hole through the three pre-drilled holes in the wall jambs into the edge of the shower. Take the jambs back off the wall, and use a 5/16” bit to enlarge the pilot holes.

delta shower doors" width="460" height="689" class="size-large wp-image-25848" />Plumb up the wall jambs. Masking tape holds them in place.delta shower doors" width="460" height="306" class="size-large wp-image-25849" />Drill 1/8″ pilot holes through the pre-drilled holes in the jambs.delta shower doors" width="460" height="362" class="size-large wp-image-25850" />Remove the jambs, and enlarge the holes to 5/16″.

Push the supplied wall anchors into these holes, and snug them in gently with a small hammer. Reposition the wall jambs, and screw them to the wall. Your screws will be used to attach bumpers to the top and bottom holes, and a special center bumper in the middle. Hey—your walls are done!

delta shower doors" width="460" height="350" class="size-large wp-image-25851" />Push wall anchors into the 5/16″ holes unless you’re drilling into a stud…delta shower doors" width="460" height="379" class="size-large wp-image-25852" />Screw through the bumpers and into the anchors.delta shower doors" width="460" height="689" class="size-large wp-image-25853" />You’re jambin’!

Laying Some Track

Now it’s time to cut the bottom track. The kits will fit various sizes of tubs and showers; getting an accurate measurement will give you a good, snug fit you need to measure the distance between the two jambs. This can be tricky to do, as it’s an inside measurement. Here’s another HF tip: measure from one end to an even number around the center of the threshold, and make a mark. I chose 24”. Now, measure from the other end to that same mark, and add those two numbers together. My second measurement came to exactly 19”, making my total length 43”.

delta shower doors" width="460" height="306" class="size-large wp-image-25855" />Measure about halfway from one side of the track, and make a mark…delta shower doors" width="460" height="306" class="size-large wp-image-25856" />Measure to that mark from the other side, and add ’em up.

Now you need to transfer that measurement onto your bottom track, and mark it for cutting. Our track hardware was bronze, which makes it really hard to see any marks. I used the tape trick again, putting a piece of masking tape on the track and making my mark on it. To avoid unnecessary foul language and elevated blood pressure, double check your measurements and marks before you cut! You want a nice, square cut, so use a miter box with your hacksaw. Make sure it’s deep enough to accommodate a 3” wide piece of material; that’s how wide my top track was. Make your cut, and use a file to smooth any burred edges. By the way, another tip the folks at Delta repeated several times was DO NOT CUT THE TOP AND BOTTOM TRACKS TO THE SAME LENGTH! They are correct, don’t do it!

delta shower doors" width="460" height="306" class="size-large wp-image-25857" />A piece of tape makes your mark easier to see.delta shower doors" width="460" height="306" class="size-large wp-image-25858" />A basic miter box gives you a smooth, square cut.

There’s a piece of gasket material in the kit; slide it into the groove in the track, and cut it to length. Now test fit your track between the jambs. Undoubtedly, it’s a perfect fit; if not (due undoubtedly to a shoddily-made tape measure or something else beyond your control), remove the track and file it to size. When all is well, fill the groove on the bottom of the track with silicone sealant, and press it into place between the jambs.

delta shower doors" width="460" height="356" class="size-large wp-image-25859" />After test-fitting the track, apply silicone sealant underneath it…delta shower doors" width="460" height="306" class="size-large wp-image-25860" />Insert the track between the jambs, and press it into place.delta shower doors" width="460" height="689" class="size-large wp-image-25861" />Three sides finished!

Next up: the top track. For this, you’ll measure the distance between the two shower walls, above the wall jambs. This is another tricky measurement to get accurately. If you’re replacing a previously-installed unit, here’s a little cheat that worked for me: measure the OLD upper track, assuming it fit properly. Mine did, so it was easy to get the exact measurement. If you’re not so fortunate, here’s an easy way to get the measurement using materials at hand: take a piece of cardboard from the packaging, and make a mark exactly 12” from a square end of it. (Alternatively, you could use a 12″ ruler or a framing square). Hold the square end against one wall, and measure over from the other wall to your 12” mark. Add the two together, and there you go! Transfer the measurement to the top rail, again using a piece of masking tape, grab your miter box, and make the cut. Again, be sure to double-check your measurement first. De-burr the end, hold the top rail over the wall jambs, and push it into place. The hardest part is done!

delta shower doors" width="460" height="306" class="size-large wp-image-25862" />If you removed an old door, just measure the old top track.delta shower doors" width="460" height="306" class="size-large wp-image-25863" />Mark the top track for cutting.delta shower doors" width="460" height="689" class="size-large wp-image-25864" />Press the top down over the wall jambs.

I Can See Clearly Now – Or Perhaps Obscurely

And now for the most rewarding segment of your Delta Shower Doors installation, the shower doors! Remember the foam I told you not to throw away? That’s where the hanger brackets were lurking. Two brackets go on each door; the inside door gets installed first. The doors are identical, so grab one and install the hangars using the pre-drilled holes in the door, making sure the grooved sides of the brackets face the label side of the glass panel. Snug up the screws but don’t go all Incredible Hulk – you don’t want to risk cracking the door, and having to explain to your friends why there’s a blue tarp hanging in your shower opening. Now just lift the door into the upper track, until the rollers rest on the track. Make sure the side of the door with the label is facing in.

delta shower doors" width="460" height="306" class="size-large wp-image-25866" />Insert a bushing into the hole…delta shower doors" width="460" height="345" class="size-large wp-image-25867" />Snug up the door hanger…delta shower doors" width="460" height="306" class="size-large wp-image-25868" />When both hangers are in place…delta shower doors" width="460" height="306" class="size-large wp-image-25869" />Lift the inside door into place on the inner rail.

Now repeat the process with the other door, but this time with the smooth side of the bracket facing the label side of the door. Lift the door into the top track, making sure the bottom of the door is inside the bottom track. Wow, it’s starting to look like a shower!

delta shower doors" width="460" height="306" class="size-large wp-image-25870" />Now repeat the process with the outer door, and lift it onto the track.

If the doors don’t meet the walls properly, they can easily be adjusted. Pop the door back out of the track, and loosen up the rollers. There are three holes the roller can be inserted into; to raise the glass, use the lower hole. To lower it, use the upper hole. Snug the roller up, and re-hang the door.

delta shower doors" width="460" height="345" class="size-large wp-image-25871" />To adjust the door, remove the screw that holds the wheel on…delta shower doors" width="460" height="345" class="size-large wp-image-25872" />Use a lower hole to raise the door, a higher one to lower it.

Once the doors are aligned properly, it’s time to install the divider on the bottom track. Measure the bottom track, find the center, and position the divider there, with the doors in the grooves. Drill 1/8” pilot holes through the edge of the divider into the bottom track, and secure it with the two self-tapping screws. Your Delta Shower Doors are secure, and you’re almost finished!

delta shower doors" width="460" height="370" class="size-large wp-image-25873" />Center the lower divider, drill pilot holes, and screw it into place.delta shower doors" width="460" height="689" class="size-large wp-image-25874" />Almost finished!

Sealing the Deal

To keep the water on the inside of your beautiful new Delta Shower Doors, take your silicone sealant and seal along the entire length of the wall jambs and bottom track, both inside and out. 100% pure silicone works best, and there are varieties made specifically for bathrooms, with mold inhibitors. All that’s left to do is install the door handles or towel bars you selected. The exact installation will vary according to your hardware, but all are designed to be used with the pre-drilled holes in the door.

delta shower doors" width="460" height="306" class="size-large wp-image-25875" />Use good silicone sealant around the entire inside and outside of the track.

Mine was very straightforward. I just inserted the rubber bushings into the holes in the door, slid a rubber gasket over the escutcheon and the handle post, and threaded them together through the hole. I installed one end, then put a bit of silicone on the towel bar, slid it into the post, and installed the other end. Easy peasy!

delta shower doors" width="460" height="376" class="size-large wp-image-25876" />No tools are needed for this towel bar, the pieces are threaded.delta shower doors" width="460" height="306" class="size-large wp-image-25877" />Hold the back piece up to the door…delta shower doors" width="460" height="306" class="size-large wp-image-25878" />insert the other side, and spin it snug.delta shower doors" width="460" height="689" class="size-large wp-image-25879" />Towel bars in, and lookin’ good!

I summoned my wife, and we stepped back and admired the transformation, what a difference! It looked great, until I opened the door and saw the old faucets and drain. Replacing them will be our next move, the spiffy new doors made us realize just how crappy the old fixtures had gotten over the past three decades. Meanwhile, the Spousal Seal of Approval was issued.

delta shower doors" width="460" height="306" class="size-large wp-image-25880" />The new hardware highlights how beat the old fixtures are…delta shower doors" width="460" height="613" class="size-large wp-image-25884" />But the doors look great!

Design Your Own Delta Shower Doors

I think the custom Delta Shower Doors concept is great. The materials are very good quality – the weight on the shower doors was about twice that of those I took out. Fit and finish is excellent, everything you need to do the installation is included, and the instructions are very good. The design and ordering process was quick and easy, and the available options should enable most buyers to design a set of shower doors that’s exactly what they want. The only quibble I had with the entire process was that it’s difficult to see exactly what the various types of glass look like, at least that was the case on my Mac. Some higher-res photos might help with that.

Pricing is very competitive with stock units, where you’re limited to whatever configuration happens to be on the shelf. With the Delta Shower Doors, you’re the boss. Don’t like pebbled glass? Go with the Mission style. Tired of the polished brass (yep!)? Get the rubbed bronze or brushed nickel. Got some fancy shmancy towel racks on the wall? Get a matching fancy shmancy towel bar on your shower door.

The flexibility is great, you can get exactly what you want, and you can control the cost. I designed a similar setup in chrome, with pebbled glass, and the total cost came to $210. You can further control your costs by choosing to pick up your Delta Shower Doors at a nearby Home Depot for free, but if your schedule is crazy, you can have it shipped to your home for $55 or so. The doors come with a limited five-year warranty.

delta shower doors" width="460" height="689" class="size-large wp-image-25891" />Before…(not bad from a distance; scary up close)delta shower doors" width="460" height="611" class="size-large wp-image-25883" />And after–three hours after, to be precise!

Ready for the three-step program? Design YOUR custom doors before November 3rd, 2014, and you can enter a sweepstakes to win $1,000 or your own set of custom Delta Shower Doors!

More Info - via DeltaShowerDoors.com

Share this awesomeness!