Read article : Master Bathroom Remodel – Shower size, sprays etc HELP
I am finally redoing my master bathroom and I am now more confused then ever.
My “plan” was to make the bathtub into a large shower (approx. 7”x4’) with shower heads and sprays on both sides of the shower and a bench on the side of the shower with the slanted ceiling. 2 of the walls are outside walls and the ceiling is the attic. I wanted to be able to use all the shower heads and sprays at the same time. I’m going for a contemporary look
When I went to a plumbing supply store to get information the man there told me how much water I would be using with all the sprays and heads going and I would run out of water very very quickly so it looks like what I wanted and what will actually work are very different. I have a 50 gallon water tank and am not planning on adding an additional tank.
So after finding this out and reading a lot on this site I do not think this will work and I’d appreciate options as to what would work. Here are my questions (I attached some pictures - the current area & my hand drawn layout)
• Should I only put the shower head and sprays on the inside wall and then on the opposite wall the handheld and the bench? Any other thoughts on where to put everything?
• Should I make the shower 7x4 or will take be too large and get cold quickly? What is the best size?
• For the bench should I go with built in or teak?
• Any other suggestions?
Thank you for your help
No comments:
Post a Comment